M-Tek15 15 round standard size double stack .17HMR magazine for the Tikka T1x rifle.
We received many requests from customers for a .17HMR version of our extended double stack Tikka T1x magazine and it’s finally here!
It functions in a broadly similar fashion as the original T1x factory magazine. It’s easy to load and feeds reliably.
The magazine is about the a bit longer than the factory magazine despite having a capacity of 15 rounds!
The magazine has a viewing holes on the side in five round increments so you can quickly see how many you have loaded.
Durability
All of our magazines are 3D printed from polycarbonate (PC).
Polycarbonate is a tough and durable engineering filament. It has a high impact resistance, very high strength and can resist temperatures in excess of 100 °C.
We have had no durability issues in all of our testing and use of these magazines.
The magazine body has thick feed lips and walls and features a ribbed design that offers extra rigidity.
We have cycled over a 1000 rounds through a magazine and seen no wear on the feed lips. The low friction nature and high wear resistance of PC plastic that these are made out of helps with that.
While we don’t recommend it we have drop tested these on all sorts of surfaces including concrete and haven’t had a single one break.
If all else fails there is a two year warranty for any breakages occurring from normal usage of the magazines.
Maintenance (every 500 rounds or when necessary)
- Disassemble the magazine and wipe dirt off with a cloth or a paper towel.
- In our experience normal bearing grease, ie. lithium grease works best. Silicones, oils, and even some PTFE dry lubricants tend to gum up the magazine.
- Apply a light coat of grease on the front and rear surfaces of the follower.
Made in Finland.
If you’re ordering from outside the EU you may have to deal with the customs and pay VAT in your own country.
Reviews
There are no reviews yet.